Looking for a ManageEngine Alternative?
Auvik delivers fast, simple & scalable network management. Built to save you time, eliminate complexity, and reduce MTTR, Auvik is the preferred choice for modern network management.
Why IT pros are switching from ManageEngine to Auvik
| Reasons why Auvik wins | What customers who made the switch are saying |
|---|---|
| Fast deployment in under an hour | “We had a demo of ManageEngine, but setting it up was like pulling teeth. I was in the middle of the demo with the people, and nothing was working right. With Auvik, we were up in 15 minutes after downloading the collector and getting it on the network. It started populating data without the need to provide a lot of information. It went so smoothly. That sold me on it.” — Jeremy C. (Source: PeerSpot) |
| User-friendly interface that’s simple & intuitive | “ManageEngine was particularly challenging due to its lack of user-friendliness. New hires consistently struggled to navigate the platform, requiring extensive training. Thankfully, this isn’t the case with Auvik… The deployment is straightforward and takes 30 minutes to set up, create the site, and deploy Auvik. One person is enough to deploy Auvik.” — Technical Project Manager (Source: PeerSpot) |
| Real-time mapping with instant visualization | “I’ve tested Pulseway, ManageEngine, SolarWinds, PRTG, and Domotz. Auvik blasts the other ones out of the water. In addition to the topology and the user interfaces, there is nothing like Auvik from a display or user experience perspective. Auvik’s dashboard is clean and not too busy. It’s easy to use, interpret and drill down into a device if necessary. It rapidly detects changes in the network environment and responds quickly with alerts.” — Oda K. (Source: PeerSpot) |
| Alerting with pre-configured, intelligent alerts | “[Auvik] has also reduced our mean time to resolution because it’s better at alerting us… It’s quicker than other platforms. We see things before they happen, such as a hard drive failing inside of a RAID set, or a problem inside a VMware system before there is a bigger problem. We can be more proactive than we could be with the other tools that we have. I’ve seen some minor issue alerts from other tools, but a lot of time they can’t see anything in a RAID set, but Auvik does.” — Jason J. (Source: PeerSpot) |
| Automated configuration backups included | “The backup of configs is also valuable. It does SSH into each network device and retains a copy of the configs on the machines as well as the change logs. So, when something suddenly stops, you can compare the configs to see what happened. You can do a side-by-side comparison of the configs to see exactly what changed. That’s fantastic.” — Senior Engineer (Source: PeerSpot) |
| Scalability with unlimited space (in the cloud) | “I’ve used [Auvik] for everything from companies that are in a single building up to a company that had offices in 20 time zones with almost 100 offices, some of them with 1,000 users, and it was able to scale up to that. I’ve never had worries about how big this can go.” — Sr. Network Engineer (Source: PeerSpot) |
| Multi-tenancy with true multi-site management | “I couldn’t find anything else that met the needs of a multi-tenant environment the way Auvik does.” — Jesse C. (Source: PeerSpot) |
| Minimal upkeep and cloud-hosted | “Auvik is a cloud-based solution, and it definitely has advantages over on-prem network monitoring solutions. We don’t have to manage anything on-prem, and we don’t have to patch the backend. We don’t have to allocate resources for the management console to work, and it’s accessible from anywhere. We don’t have to back up the virtual machine or the appliance because everything is managed by Auvik. We really like that part.” — Director of IT (Source: PeerSpot) |
| Integrations with pre-built PSA & ITSM integrations | “Auvik allowed me to seamlessly integrate into my new workplace and gain immediate visibility into the entire environment. Implementing the other tools would have been a much more time-consuming process.” — Dan S. (Source: PeerSpot) |
| Predictable pricing, pay only per critical network device — manage others free! | “Auvik is extremely fair in how they break down a billable device versus something that isn’t… Auvik makes it really easy to understand that you aren’t going to get billed for certain things. They’re cutting themselves short, in my opinion, but I’ve never had to worry about pricing from Auvik. It’s always been very affordable.” — Anthony L. (Source: PeerSpot) |
We did look into ManageEngine… Auvik was easier to get configured and it was easier to understand the data. Overall, it was more than just user-friendly and had a good price scheme.
Tim K
(Source: PeerSpot)
Special deal*
Make the switch to Auvik and get:
•
FREE 6 months
•
FREE onboarding
•
A FREE Ubiquiti POE switch
*Applies to new Auvik customers who sign up for a 3-year subscription of Auvik Network Management. Must show proof of being a SolarWinds customer with an invoice less than 12 months old. Cannot be combined with other discounts or promotions. The first year of the subscription will be billed at 50%, equating to getting 6 months free.
No credit card required to start your free trial.
Integrations
Connect to your tools with integrations and APIs
More Integrations
- ArcusTeam
- Autotask PSA
- BrightGauge
- Captain’s Chair
- ChatGenie
- CloudRadial
- ConnectWise Automate
- ConnectWise Manage
- Continuum
- Freshdesk
- Global Dash
- iLert
- ITBoost
- IT Glue
- Liongard
- Microsoft Teams
- Opsgenie
- ScalePad
- ServiceNow
- PagerDuty
- PagerTree
- Passportal
- Slack
Can’t find the integration you need? Get in touch and we will do our best to help.
About our API and Webhooks
The Auvik APIs allow you to pull various data points from Auvik and integrate them into a third-party application or use the data yourself.
Alert History API
Pulls alert history for a trailing time period or a specific interval between two specified date-and-time pairs.
Credentials API
Verifies your credentials are correct before making a call to an endpoint.
Inventory API
Pulls inventory information on devices such as names, IP addresses, interfaces, firmware versions, configurations, and more.
Tenants API
Shows you if you have access to sites or multi-sites associated with your Auvik user account.
Usage API
Pulls a summary of a site’s usage for a given time range to help you calculate customer invoices or department chargebacks.
Book a demo
See what full network visibility looks like with Auvik
- Map your network in minutes
- Monitor unlimited sites & devices in real-time
- Reduce MTTR with 60+ ready-to-use smart alerts
- Supports SNMP, NetFlow, SSH, vendor APIs & more